Table of Contents
The intent of this project is to create a product which will measure Electro Oculogram(EOG) signals as well as take images of the human eye. This information can be used by faculty researchers in the areas of Electrical and Biomedical Engineering. A successful project will involve mechanical designs for both structure and ergonomics as well as electrical designs for sensors, amplifiers and integrated circuits.
This project is sponsored by the Department of Electrical Engineering in the Kate Gleason College of Engineering at the Rochester Institute of Technology.
- Project Name
- Eye Movement Tracking Device
- Project Number
- Project Family
- Assistive Device Family
- Assistive Devices and Bioengineering Track
- Start Term
- End Term
- Faculty Guide
- Dr. Amuso (Electrical Engineering)
- Faculty Consultant
- Dr. Phillips (Electrical Engineering)
- Jeff Pelz (Imaging Science)
- Graduate Teaching Assistant
- Primary Customer
- Dr. Amuso
- Customer contact information
- RIT Department of Electrical Engineering
- Department Head
- Office: 09-3109
- Team Planning
- Project Documents
- Project Plan
- System Level Design Review
- Detailed Design Review
- MSD II
This outline for the posting of team created documents follows the general product development process presented in the textbook "Product Design and Development" by Ulrich and Eppinger.
Portions of the team documents have been prepared by a DPM student prior to the launch of this project. This information is intended to help get the team started with a first draft needs assessment and work breakdown structure. The team members can adapt this information as the project progresses.
Keep in mind that everything you include in this web tree is visible to the world and the general public. If you have documents that reflect work in progress, or contain data that has not been fully vetted, then it may be better to include those internal working documents in the private section of the web tree, or in the project repository proper, outside of the web tree. Note that anyone with Guest or higher memberhsip in your project can read your entire project repository. Anyone with an Editor or higher membership can makes changes to your repository. All Observer members can view, but not edit, the web portion of your repository.
These links provide a basic starting point for your team to prepare a comprehensive web site about your project.
After you get started on the project, you may want to replace these introductory paragraphs with a photograph of your team. Near the conclusion of your design project, you may also wish to include a photo of your finished product.
As you conclude the project, include links to all of your finished and fully polished documents here. The previous sections of the web site contain the entire design history of your project. This section contains the finished products. Add more links as needed.
Concept Design Review Documents (SD I)
Detailed Design Review Documents (SD I)
Managerial Design Review Presentation (SD I)
Technical Conference Publication (SD II)
Poster Publication (SD II)
Managerial Design Review Presentation (SD II)
Simply Adding Documents