P07052: DUPLICATE? REMOVE? SEE CONTENT IN P08006 --Motion Tracking System
/public/

Home

Table of Contents

Project Overview

The physical therapy clinic at Nazareth College currently makes use of goniometers to measure range of motion. There is usually a need for two physical therapists to obtain the measurement with stroke patients. A motion tracking device would enable such measurements to be made in an automated or semi-automated fashion. This type of tracking device could be combined with exercise equipment and a telemedicine based environment to provide a more comprehensive solution in terms of rehabilitation and therapy. The envisioned tracking system will consist of a flexible and potentially expandable processor based system that incorporates position sensors and a video camera to acquire and analyze clinically relevant motion information.

Administrative Information

Project Name
Motion Tracking System for Physical Therapy Evaluation
Project Number
P07052
Project Family
P07000
Track
Assistive Devices
Start Term
2006-3
End Term
2007-1
Faculty Guide
Dr. Daniel Phillips (Electrical Engineering)
Faculty Consultants
Dr. Elizabeth DeBartolo (Mechanical Engineering), Dr. Matthew Marshall (Industrial and Systems Engineering), Dr. Edward Brown (Electrical Engineering), TBD (Information Technology or Software Engineering)
Graduate Teaching Assistant
TBD
Primary Customer
Physical Therapy Clinic
Customer contact information
Nazareth College
Staffing
Team Member Discipline Role E-Mail Address
Daniel Phillips EE Guide dbpeee@rit.edu
Matthew Marshall ISE Consultant mmmeie@rit.edu
Edward Brown EE Consultant eebeee@rit.edu
Elizabeth DeBartolo ME Consultant eademe@rit.edu
Josemaria Mora EE Project lead jxm1072@rit.edu
EE2 EE TBD fmlxxxx@rit.edu
ME1 ME TBD fmlxxxx@rit.edu
ME2 ME TBD fmlxxxx@rit.edu
ISE1 ISE TBD fmlxxxx@rit.edu
SE1 SE TBD fmlxxxx@rit.edu
Related Projects
Project Title Start Term End Term
P07000 Assistive Devices and Bioengineering Track 2006-1 On-going
P07001 ARC communication board 2006-1 TBD
P07002 Two way communication board 2006-1 TBD
P07003 Mobile Camera Control System 2006-1 TBD

Project Readiness Package

The Project Readiness Page documents customer needs and expectations, project deliverables (including time frame), budget, and personnel / organizations affiliated with the project. It will serve as the primary source of information for students necessary during Phase 0 (Planning) to develop a SD I plan and schedule including specific deliverables and due dates. The Project Readiness Package will also support Faculty evaluation of project suitability in terms of depth, scope, and student / faculty resources by discipline.

The original PRP Word Document

A pdf version can be obtained here

Team Documents

This outline for the posting of team created documents follows the general product development process presented in the textbook "Product Design and Development" by Ulrich and Eppinger.

Portions of the team documents have been prepared by a DPM student prior to the launch of this project. This information is intended to help get the team started with a first draft needs assessment and work breakdown structure. The team members can adapt this information as the project progresses.

Keep in mind that everything you include in this web tree is visible to the world and the general public. If you have documents that reflect work in progress, or contain data that has not been fully vetted, then it may be better to include those internal working documents in the private section of the web tree, or in the project repository proper, outside of the web tree. Note that anyone with Guest or higher memberhsip in your project can read your entire project repository. Anyone with an Editor or higher membership can makes changes to your repository. All Observer members can view, but not edit, the web portion of your repository.

These links provide a basic starting point for your team to prepare a comprehensive web site about your project.

After you get started on the project, you may want to replace these introductory paragraphs with a photograph of your team. Near the conclusion of your design project, you may also wish to include a photo of your finished product.

Planning

Mission Statement

Staffing Requirements

Intellectual Property Considerations

Preliminary Work Breakdown Structure

Team Values and Norms

Grading and Assessment Scheme

Required Resources

Concept Development

Identify Customer Needs

Establish Target Specifications

Generate Product Concepts

Select Product Concept(s)

Test Product Concept(s)

Set Final Specifications

System Level Design

Product Architecture

Detail Design

Design for Manufacturing and Assembly

Robust Design

Design for the Environment and Sustainability

Design for Reliability

Design for Safety

Testing and Refinement

Prototyping

Published Documents

As you conclude the project, include links to all of your finished and fully polished documents here. The previous sections of the web site contain the entire design history of your project. This section contains the finished products. Add more links as needed.

Concept Design Review Documents (SD I)

Detailed Design Review Documents (SD I)

Managerial Design Review Presentation (SD I)

Technical Conference Publication (SD II)

Poster Publication (SD II)

Managerial Design Review Presentation (SD II)

Photo Gallery

Miscellaneous References and Resources

A Hand Motion Tracking Device