P08102: Meteor RITSAT 1
/public/

Project Readiness Package

Table of Contents

The objective of the Project Readiness Package is to document:

It will serve as the primary source of information for students necessary during Phase 0 (Planning) to develop a SD I plan and schedule including specific deliverables and due dates. The Project Readiness Package will also support Faculty evaluation of project suitability in terms of depth, scope, and student / faculty resources by discipline.

Administrative Information

Proposal Number
Project Name
METEOR RITSAT1
Project Number
P08102
Track
Aerospace
Start Term
2006-1
End Term
2006-3
Guide
Dr. Patru
Customer organization
RIT Electrical Engineering
Customer contact information
Dr. Patru
Assistant Professor
475-2388
dxpeee@rit.edu
Principal sponsor
Harris Corporation and Project METEOR

Project Continuation

This is a continuation of Project P07104.

Project Overview

It is projected that by summer 2008 the METEOR Project will have the capability to perform a sub-orbital flight. RITSAT1, RIT's First Satellite, will serve as the payload, and will relay sensors data and control actuators. One previous senior design team has designed and built the RITSAT1 hardware. This team will first focus on the associated software development and ground testing of RITSAT1. Then the satellite will also be tested in flight at least once, tethered from the Instrumentation Platform.

Staffing Requirements

Discipline Number of Students Skills Required
EE 2-4 Ability to work with analog and RF circuitry and systems, design of digital, analog and mixed-signal hardware, program in Assembly and C.
ME 0 N/A
CE 2-0 Understand hardware and program in C and Assembly.
ISE 0 N/A
Other 0 N/A
NOTE 2 EE or 2 CE or 1EE&1CE have to develop software. All students on the team are expected to participate in several, weekend long field activities. Attendance is mandatory, except for reasons as described by RIT Policies!

Continuation, Platform, or Building Block Project Information

This is a continuation of Project P07104. The team will start work using two RITSAT1's, built by the previous team.

Principle Sponsor or Sponsoring Organization

Harris Corporation and Project METEOR

Detailed Description

See Project P07104 documents.

Customer Needs

This is the second senior design team to work on RITSAT1, which has been designed to serve as a redundant monitoring platform for the suborbital and first orbital flights of the METEOR Launch System.

At this stage, RITSAT1 needs:

Customer Deliverables

The following requirements complement or repeat the deliverables in the Course Deliverables Document. At the end of the project, the team is expected to deliver to the customer the following documents and materials:

The team is expected to deliver two fully functional, ground tested satellites. If arrangements with local companies can be made, these should also be tested in vacuum and on a vibration table. A fully functional satellite is one which has met all design specifications under ground and in flight tests, as set by the team and mentors at the end of the third week of quarter 2007-1. These are necessary for the first suborbital flight test, tentatively scheduled for summer 2008.

Customer and Sponsor Involvement

The team will be expected to carry out the vast majority of their interactions with the Team Guide, Dr. Patru. Dr. Patru also will act as the customer and will be available for a regularly scheduled meetings during the course of the project.

Regulatory Requirements

Project Budget and Special Procurement Processes

The Project has a budget of $ 5K, BUT ALL expenditures have to be reviewed and approved by Dr. Patru. The team is expected to generate an estimated budget by the end of the third week of school.

Intellectual Property Considerations

Everything associated with this project is public domain. Therefore, students will be required to sign a Waiver of Intellectual Property associated with the IP generated during their work on this project. The students are encouraged to carefully read and if they deem necessary to contact a legal counselor before signing.

Engineering Specifications

Refer to Project P07104 documents.

Safety Constraints

Refer to Project P07104 documents.

Detailed Course Deliverables

See Overall Deliverables.

The student team must also meet all requirements related to analysis, documentation, presentations, web sites, and posters, etc. that are common to all projects.

Overall Deliverables

The following requirements complement or repeat the deliverables in the Course Deliverables Document. At the end of the project, the team is expected to deliver to the customer the following documents and materials:

Deliverables Breakdown

See Overall Deliverables.

Preliminary Work Breakdown

The following roles are not necessarily to be followed by the team. It is merely to justify the number of students from each discipline. The student team is expected to develop their own work breakdown structure, consistent with the general work outline presented in the workshop series at the beginning of SD1. However, the customer requests a level of detail NO GREATER than weekly tasks to be completed by each student team member for the benefit of the other team members. The customer DOES NOT request any level of detail finer than one-week intervals, but will assist the team members if they wish to develop a finer level of detail to support their own efforts.

EE:
  1. Digital, analog and mixed-signal hardware.
  2. Analog and RF hardware.
EE/CE:
  1. Microcontroller Software.
  2. Microcontroller Software.

Grading and Assessment Scheme

Grading of students in this project will be fully consistent with grading policies established for the SD1 and SD2 courses.

This project does not require concept studies. This activity is replaced with the mission operations during the Brick City Festival.

At the end of Senior Design I, the following would be considered when assigning points to the activities in the syllabus rubric:

At the end of Senior Design II, the following would be considered when assigning points to the activities in the syllabus rubric:

These grading criteria will be changed ONLY if causes out of the teams control will impact the design, implementation and testing.

Three-Week SDI Schedule

Course deliverables Documents (Phase 0)

Required Resources

Faculty
Item Source Description Available
Dr. Patru EE Guide Yes
Environment
Item Source Description Available
METEOR Team Room EE 09-4xx Work Space/Storage Yes
METEOR Mission Control EE 17-400 Ground Testing and Mission Control Yes
CEMA Lab CIMS Bldg. PCB surface mount Yes
ME Shop ME 09-2360 Small ME Parts Fabrication Yes
Equipment
Item Source Description Available
Test equipment METEOR Used for Electrical Testing Yes
Desktop PC METEOR Used for Programming Yes
Software
Item Source Description Available
IAR METEOR Used for MSP430 Software Development Yes

The team members will be expected to procure the materials needed for the project, excluding the following:

Materials
Item Source Description Available
Misc. electronic components, small mechanical hardware, Helium tanks and balloons EE & ME depts Yes