P10022: Transcutaneous signal transmission for VAD
/public/

Drawings and Schematics

The following schematics are arranged from most general to most specific. Please scroll down to see mechanical drawing of the enclosures.

Schematics

 The entire cable assembly. The relative scale of each part is approximately correct.

The entire cable assembly. The relative scale of each part is approximately correct.

-
 The proposed locations inside the body and sizes of each component (including the case made by P10021).

The proposed locations inside the body and sizes of each component (including the case made by P10021).

-
 Some details on signals and components at each end of the cable.

Some details on signals and components at each end of the cable.

-
 The current system has no components capable of being implanted, thus a large transcutaneous cable.

The current system has no components capable of being implanted, thus a large transcutaneous cable.

-
 The new design will use SPI signal controller to allow for only a few transcutaneous wires.

The new design will use SPI signal controller to allow for only a few transcutaneous wires.

Mechanical Drawings

 External PC board enclosure.

External PC board enclosure.

-
 Internal PC board enclosure.

Internal PC board enclosure.