P11208: WOOCS: Mid-Range RF Module - Zigbee
/public/

Documentation

Table of Contents

System on Chip - CC2531

Description:

The CC2530 is a true system-on-chip (SoC) solution for IEEE 802.15.4, Zigbee and RF4CE applications. It enables robust network nodes to be built with very low total bill-of-material costs. The CC2530 combines the excellent performance of a leading RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM, and many other powerful features. The CC2530 comes in four different flash versions: CC2530F32/64/128/256, with 32/64/128/256 KB of flash memory, respectively. The CC2530 has various operating modes, making it highly suited for systems where ultralow power consumption is required. Short transition times between operating modes further ensure low energy consumption.

Data sheet:

RF Power Amplifier - CC2591

Description:

CC2591 is a cost-effective and high performance RF Front End for low-power and low-voltage 2.4-GHz wireless applications. CC2591 is a range extender for all existing and future 2.4-GHz low-power RF transceivers, transmitters and System-on-Chip products from Texas Instruments. CC2591 increases the link budget by providing a power amplifier for increased output power, and an LNA with low noise figure for improved receiver sensitivity. CC2591 provides a small size, high output power RF design with its 4x4-mm QFN-16 package. CC2591 contains PA, LNA, switches, RF-matching, and balun for simple design of high performance wireless applications.

Data sheet:

Reference Design:

Power Regulator

PMIC - Voltage Regulators - Linear

PMIC - Voltage Regulators - Linear

Data Sheet:

CC2531 Evaluation Module Kit

CC2531EMK

CC2531EMK

Description:

The CC2531EMK kit provides one CC2531 USB Dongle and documentation to support a PC interface to 802 .15.4 / ZigBee applications. The dongle can be plugged directly into your PC and can be used as an IEEE 802 .15.4 packet sniffer or for other purposes. With the CC2531 USB Firmware Library available on the web you can develop your own software to utilize this part. To program the debugger, an external programmer (e.g. the SmartRF05EB) is required. This is not included in the kit. The USB dongle can be used as a reference module for prototyping of USB devices and for testing the RF performance of CC2531 with a small size PCB antenna.

Reference Design:

User Guides:

Quick Start Guide:

Support Software:

CC Debugger

CC Debugger

CC Debugger

Description:

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling selected devices from SmartRF Studio.

Contents in the box:

User Guide:

Quick Start Guide:

Antenna

Whip: 1/4 Wave, Swivel, Tilt (Right Angle)

Whip: 1/4 Wave, Swivel, Tilt (Right Angle)

Data Sheet:

Power Connector

Molex 39301021

Molex 39301021

Data Sheet:

USB Connector

Product photo

Product photo

Product Highlights:

292304-2

292304-2

Data Sheet:

LED Bank

551

551

Data Sheet:

RF Connector

RF Connectors RP-SMA Female Right Angle PCB Mount

RF Connectors RP-SMA Female Right Angle PCB Mount

Data Sheet:

Programming Connector

Programming Connector - 95278

Programming Connector - 95278

Data Sheet:

Power Switch

SW SLIDE DPDT 6VDC 0.3A PCMNT

SW SLIDE DPDT 6VDC 0.3A PCMNT

Data Sheet:

Ground Connector

Battery Contacts

Battery Contacts

Data Sheet:

Capacitor

Part # Description Data Sheet
C1, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 Capacitor, 100n, 0402, X5R, 10%, 10V c02e14
C100, C102 Capacitor, 47pF, 5%, 50V c02e14
C101 Capacitor, 10pF, 5%, 50V 821
C114, C117 CAP CER 1.0UF 10V X7R 0805 djmk_e
C201, C2 Capacitor, 1u, 0402, X5R, 10%, 6.3V 816
C202, C203 Capacitor, 27p, 0402, NP0, 5%, 50V c02e14
C301, C302 Capacitor, 1p8, 0402, NP0, +/-0.25pF 50V GRM1555C1H1R8CZ01
C303, C304 Capacitor, 10p, 0402, NP0, 5%, 50V GRM1555C1H100JZ01
C401 Capacitor, 6p8, 0402, NP0, +-0.25pF 50V c02e14
C402 Capacitor, 1p5, 0402, NP0, +-0.25pF, 50V 821
C403 Capacitor, 2p7, 0402, NP0, +-0.25pF, 50V 821

Resistor

Part # Description Data Sheet
R100, R102 Resistor, 33ohm, ±1% res5
R101 Resistor,1,5kohms, ±1% res5
R201 Resistor, 56k ohms, 0402, ±1% res5
R401 Resistor, 4k3 ohms, 0402, 2% res5

Inductor

Part # Description Data Sheet
L301, L302 Inductor, 1n0, 0402, Monolithic type, +/-0.3 nH 1017
L401 Inductor, 1n5, 0402, wire-wound type, +/-0.1 nH L0075S0080LQW15A_00
L402 Inductor, 1n0, 0402, Monolithic type, +/-0.3 nH 1017