Team picture with plane.
Scott making a servo tray.
Jordan in his corner.
Scott and Jordan making sheeting.
More sheeting being made.
Vacuum bag tape to seal our vacuum bag.
Center wing section being epoxied together.
Steve making a new switch for a second vacuum pump.
Fuselage waiting for the wings to be done.
Wing tip sections being test fitted together.
Nathan fixing the formers to the wing tips.
Right wing tip epoxied together.
Michelle putting together the left wing tip.
Weights holding together the epoxied wing tip.
Vacuum pump used for pulling a vacuum.
Fuselage fiberglassed with main landing gear attached.
Wing tip sections in the first vacuum bag.
Close up of single wing section in vacuum bag.
Hose connecting vacuum bag to pump.
Motor attached to the motor mount.
Fuselage as viewed nose on.
Center wing section epoxied together.
Close up of bottom of center section with channel.
Top view of center wing section.
Joint between wing box and root wing section.
Jordan assembling the motor mount.
Elevator, horizontal tail, and tail box curing.
Nose gear attachment box.
Team attaching center wing section to fuselage.
Plane fully assembled for the first time.
Another view of the assembled plane.
Plane ready for first skip test.