/public/

Drawing Package

Full Drawing Package

Complete Drawing Package

• One file with all of the below drawings and spec sheets.

Drawings

Bearing Health Test Fixture

• Full assembly with labeled sub components.

Base Plate

• Drawing of the base plate that everything is mounted on.

Lower Mount Assembly

• Component assembly with labeled sub components

Lower Bearing Clamp Half

• Drawing of the lower bearing clamp half which the bearing rests in. Attaches to the rails and one accelerometer mounts to it.

Rail Adapter

• Drawing of the rail adapter which connects the lower bearing clamp half to the the carriage.

Top Bearing Carrier

• Drawing of the top bearing carrier which attaches to the lower bearing clamp half, encapsulating the bearing. The second accelerometer mounts on this.

Motor Assembly

• Component assembly with labeled sub components

Press Fit Mandrel

• Drawing of the press fit mandrel which holds the bearing on the shaft and transmits the rotation from the shaft to the bearing.

Drive Shaft

• Drawing of the drive shaft which connects the motor to the mandrel.

Motor Mount

• Drawing of the motor mount which holds the motor at the correct height and dampens out some of its vibrations.

Press Out Plate

• Drawing of the press out plate which is a fixture used for putting the bearing on the mandrel and then taking it off.

Press Alignment Cup

• Drawing of the press alignment cup which aligns the mandrel to the bearing for assembly.

1/4-20 x .75 Black-Oxide Alloy Steel SHCS

• Drawing of 1/4-20 x .75 SHCS used for attaching the motor to the motor mount.

1/4-20 x 2.5 Black-Oxide Alloy Steel SHCS

• Drawing of 1/4-20 x 2.5 SHCS used for attaching the motor mount to the base plate.

5/16-18 x 1 Black-Oxide Alloy Steel SHCS

• Drawing of 5/16-18 x 1 SHCS used for connecting the top bearing carrier to the lower bearing clamp half.

#8-32 x .75 Black-Oxide Alloy Steel FSHCS

• Drawing of #8-32 x .75 FSHCS used to connect the rail adapter and the lower bearing clamp half.

Type 316 SS Dowel Pin

• Drawing of dowel pin used to align the top bearing carrier to the lower bearing clamp half.

Spec Sheets

NI USB-6210 DAQ

• Spec sheet for the DAQ.

PCB 352C33 Accelerometer

• Spec sheet for the accelerometer.

Ruland Manufacturing Coupling, 1/2" Bore

• Picture and specs of the coupling used to connect the drive shaft and motor.

Harbor Freight 1 Ton Arbor Press

• Picture and specs of the arbor press.

Home | Research | Planning & Execution | Systems Design | Detailed Design | Drawing Package | Testing Results and Procedures | Final Documents