Integrated System Build & Test
Table of Contents
Standings as of 3/17/16
Procurement Status: 100% of parts ordered, barring need to order helicoils.
Projected Budget standing: $313.75 spent out of $600 (52%).
Potential Procurement Problems: Gears have been machined, need to install helicoils, will have updates for next week (3/29/16).
Assembly: Sensor: 100% assembled, Tank: 100%, Resistor: 75% assembled. Tubing: 100% received.
Software Development: 90% complete.
Test Results Summary
Test Results from this phase
For this phase we assembled the system and started the validation of the design and labview code.
Risk and Problem Tracking
Functional Demo Materials
LabView Block Diagram and Front Panel displays
Front Panel Display for the current LabView Code. This output is incorrect as it was made before it was determined that the LabView code was incorrect. These waveforms were made with the pressure sensors exposed to atmosphere.
Plans for next phase
Assembly and Construction Manual
Currently we have a work in progress for the assembly and construction manual. A version of this work can be found by clicking here
For a PDF of the Project Plan click here.
For a live document click here.
Metrics of Quality, Peer Review and note from review
For the Metrics of Quality and Peer Reviews for this phase click here.
For notes from the Integrated System Build and Test Review click here.
Tentative Imagine RIT Presentation Schedule
Imagine RIT runs from 10 am to 5 pm. We are allotting ourselves 1 hour to set up the display before Imagine and 1 hour to tear down the display after Imagine. The presentation schedule is as follows:
Jake: 9-11 : 3-6
|Planning & Execution||Problem Definition||Systems Design||Subsystem Design||Preliminary Detailed Design||Detailed Design|
|Build & Test Prep||Subsystem Build & Test||Integrated System Build & Test||Integrated System Build & Test with Customer Demo||Customer Handoff & Final Project Documentation||Imagine RIT|