Integrated System Build & Test with Customer Demo
Table of Contents
Standings as of 4/14/16
Procurement Status: 100% minus replacement tank for one that was broken on 4/12/16
Projected Budget standing: 60%
Assembly: Total System: 85%, Tray: 5%, Resistor: 95%, Tanks and Fittings: 95%.
Software Development: 95% complete
Assembly Manual: 30% complete
Engineering Requirements with Confidence Levels
This PDF shows the photo above, but you can zoom in to more easily read the data.
The above picture and corresponding live link capture our Engineering Requirement and our confidence level of being able to obtain them by the end of the semester.
Test Results Summary
Test Results from this phase
Testing was not able to be completed this phase due to various setbacks with the tanks leaking, breaking and the need to re-write portions of labview.
We determined that our gear ratio for the plate resistors is 1.0769.
With this ratio we determined that 8.64 turns of the drive gear will leave 0.1 inches open in the tube and 9.72 turns will leave 0.05 inches open. Neglecting compression from the tube.
Risk and Problem Tracking
For an excel version of the Risk Chart click here.
Functional Demo Materials
LabView Block Diagram and Front Panel displays
This picture is the Front Panel design for our current LabView code. This would be where the student interacts with the program and obtains results.
Plans for next phase
Assembly and Construction Manual
Currently we have a work in progress for the assembly and construction manual. A version of this work can be found by clicking here
For a PDF of the Project Plan click here.
For a live document click here.
Lab Outcomes and Expectations
Currently we have a work in progress for the Lab Outcomes and Expectations. A version of this work can be found by clicking here
Poster and Paper
For a PDF version of this poster click here
This PDF is the notes that were gathered during the review with Dr. Bailey and Mr. Garavuso.
Here is the Peer Review from this phase.
This link is for the outline of our paper. This is an outline and is obviously incomplete.
|Planning & Execution||Problem Definition||Systems Design||Subsystem Design||Preliminary Detailed Design||Detailed Design|
|Build & Test Prep||Subsystem Build & Test||Integrated System Build & Test||Integrated System Build & Test with Customer Demo||Customer Handoff & Final Project Documentation||Imagine RIT|