Customer Handoff & Final Project Documentation
Table of Contents
Team Vision for Final Demo and Handoff
During this phase, we looked to finish testing, and software development. Additionally, we aimed to finish all documentation in order to hand off the project to our customers.
Fortunately, we were able to finish our project and all documentation.
Test Results Summary
All of our tests passed. One test is shown below. For further test results please see the final paper section below.
Uniform field test setup:
There are 13 different points recorded. A 1 inch x 1 inch grid was used to get the appropriate spacing. The magnetometer was fastened to a piece of wood for precision and accuracy.
Results on each axis:
The results show an incredibly uniform field within the points tested. Any differentiation could be do to human error when moving the magnetometer.
All risks have been addressed.
The file can be found here.
Final Project Documentation
Final Technical PaperTechical Paper
Final Bill Of Materials
Construction ManualConstruction Manual
YouTube Construction Videohttps://www.youtube.com/watch?v=eXeESeiLp3I
Video Folder (1.8 GB)Video Folder
Software/Electrical SchematicsSoftware Manual
Recommendations for future work
- The next step in this work would be to develop an air bearing table as a test bed for the CubeSat. Providing a ‘friction - less’ support for the CubeSat to rotate freely about all axes would be an ideal way to test the ADCS system of a CubeSat within our ADCS testing apparatus.
Plans for Wrap-up
- Discuss project with members of RIT SPEX
- Clean up workspace