|
Table of Contents
|
Team Vision for Subsystem Level Build & Test Phase
During this phase, the team did all preparatory work necessary to start building major sub-assemblies. This included machining aluminum, steel, and wooden parts, finishing the remainder of the purchasing, as well as making progress towards the completion of the static thrust test. At the end of Week 5, the fuselage sub-assembly has been assembled, and electrical systems necessary for the static thrust test have been tested and verified.This document summarizes all of the work done during Week 3 of MSD II: P16121 MSD II Week 3 Summary
This document summarizes all of the work done during Week 4 of MSD II: P16121 MSD II Week 4 Summary
This document summarizes all of the work done during Week 5 of MSD II: P16121 MSD II Week 5 Summary
Week 3 Manufacturing
Summary of machined aluminum parts
Water jet cut parts from the Brinkman Lab
Dom machining some fasteners
Elevator rib art
Custom Fasteners
Laser wood cutter in action
Matt and Chris prepping parts for the laser wood cutter
Ron sanding machined aluminum parts
Finished static thrust test fixture
Summary of laser cut wood after week 3
Week 4 Manufacturing
Matt and Dom with the assembled aluminum air frame
Purchased landing gear wheels
Democratic Receiver
Week 5 Manufacturing
Chris and Matt working on the fuselage floor
Dom staring down the wing box frame
Dissasembling wing spars from wing box
Chris finishing the floor while Ron sands the aluminum motor mount
Chris and Matt installing the fuselage side walls
Home | Planning & Execution | Imagine RIT
Problem Definition | Systems Design | Subsystem Design | Preliminary Detailed Design | Detailed Design
Build & Test Prep | Subsystem Build & Test | Integrated System Build & Test | Integrated System Build & Test with Customer Demo | Customer Handoff & Final Project Documentation
- Viewing the latest revision
- Node updated 2016-05-19 10:44 by mmp1854