/public/

Build & Test Prep

Table of Contents 1 Team Vision for Build & Test Prep Phase 2 Team Schedule/Timeline 3 Individual Schedules 4 Test Plan Summary 4.1 Other test plan flows 5 Risk and Problem Tracking 6 Demo Expectations (weeks 5, 8, 11) 7 Risks concerning the team 8 BOM 9 Plans for next phase

Team Vision for Build & Test Prep Phase

Summary:

• In this phase we planned to:
  • Finish the PCB Design
  • Check calculations for components on the PCB
  • Order components for PCB
  • Have a professional look over the PCB
  • Test the MOSFETs
  • Create a plan for heat dissipation
  • Create a plan for electrical isolation of powerfets
  • Development of motor controller algorithms

• We actually accomplished:
  • All of the above
  • Motor controller algorithm is ongoing.
  • PCB components are on order.

Team Schedule/Timeline

• Gantt Chart Live Document

Individual Schedules

• Individual Schedules Live Document

Test Plan Summary

• Test Plan Live Document

Other test plan flows

Risk and Problem Tracking

• Risk Management Live Document

Demo Expectations (weeks 5, 8, 11)

• Week 5
  • Working CAN Communications
  • PCB nearing complete debug
    • This includes a report/summary of all issues found
  • Working temp sensor
  • Working powerstage when using motor controller
  • Working electrical isolation solution (sil-pad) installed
  • Working thermal disipation solution (sil-pad) installed

• Week 8
  • All things that were unfinished/unable to be complete from week 5 and:
  • Working torque controller (rather than speed controller)
  • Working PCB or, if last failed and had to be reorder, contigency plan
  • Fully operational enclosure
  • Power calculations have been performed and reduction considered/attempted

• Week 11
  • All things that were unfinished/unable to be complete from weeks 5 and 8 and:
  • Bike is outfitted with final design for motor controller, powerstage and enclosure
  • Paper nearing completion/starting if appropriate

Risks concerning the team

• Risks are currently low
• Whenever issues/risks arrive we work through them usually on paper first then formally
  • We do subteam and team meetings on the issue/risk
  • If we required help, as we have in the past, we know where to go to find it

BOM

• Bill of Materials Live Document

• Mouser BOM

Plans for next phase

• Adam Hirsch Individual Plan Live Document
• Derek Gutheil Individual Plan Live Document
• Joseph Kubeck Individual Plan Live Document
• Matthew Behlke Individual Plan Live Document
• Samuel Carlson Individual Plan Live Document

---

Home | Planning & Execution | Imagine RIT

Problem Definition | Systems Design | Subsystem Design | Preliminary Detailed Design | Detailed Design

Build & Test Prep | Subsystem Build & Test | Integrated System Build & Test | Integrated System Build & Test with Customer Demo | Customer Handoff & Final Project Documentation