P16318: Gaseous Flow Rate Meter
/public/

Integrated System Build & Test with Customer Demo

Table of Contents

Team Vision for System Level Demo with Customer

In this phase we focused on acquiring a good test set up for the flow meter device. In order to get a consistent flow, the flow device is directly hooked up to the pressurized source. Thus, no extra factors in the air flow.

Test Results Summary

Instructions

requirements and testing document

Final Design Render with new valve and cam

Final Design Render with new valve and cam

Final Design Render with Rotameter

Final Design Render with Rotameter

Top View of Final Design

Top View of Final Design

By 25% throttle opening, the lower value of target flow rate range for 60 psi was met. At the upper limit of the available flow measurement equipment, the flow was still in the target range.

By 25% throttle opening, the lower value of target flow rate range for 60 psi was met. At the upper limit of the available flow measurement equipment, the flow was still in the target range.

Inputs & Source

Test Set Up

Test Set Up

Outputs & Destination

Final Test Set Up

Final Test Set Up

Risk and Problem Tracking

Plans for next phase


Home | Planning & Execution | Imagine RIT

Problem Definition | Systems Design | Subsystem Design | Preliminary Detailed Design | Detailed Design

Build & Test Prep | Subsystem Build & Test | Integrated System Build & Test | Integrated System Build & Test with Customer Demo | Customer Handoff & Final Project Documentation