P17512: Xerox 3D Print Head
/public/

Integrated System Build & Test with Customer Demo

Table of Contents

Team Vision for System Level Demo with Customer

The team finalized the motion control integration in all 3 axis's. Also the mechanical team machined the final components for the enclosure. The clamping mechanism fixture was also machined and implemented. Most importantly, our UV film for our enclosure was tested with a "Power Puck" loaned to us by Paul McCownville of Xerox. With this device we were able to very that our UV film met safety standards and we would be able to cure ink with the radiation of the bulb.

Test Results Summary

UV Lamp Testing

UV Lamp Testing

Power Puck Results

Power Puck Results

UV Data Analysis

UV Data Analysis

Risk and Problem Tracking

Plans for next phase

For the next phase we plan on verifying our jetting capabilities and finishing the final touches on the enclosure. Now that we verified the UV light is safe, we can proceed.

Home | Planning & Execution | Imagine RIT

Problem Definition | Systems Design | Preliminary Detailed Design | Detailed Design

Build & Test Prep | Subsystem Build & Test | Integrated System Build & Test | Integrated System Build & Test with Customer Demo | Customer Handoff & Final Project Documentation