P18081: Mechanical Bioreactor
/public/

Project Photos and Videos

Figure 1: New vacuum oven purchased through the BME department. This oven will be used by future students to make chamber molds for the Cell Straining System.

Figure 1: New vacuum oven purchased through the BME department. This oven will be used by future students to make chamber molds for the Cell Straining System.

Figure 2: Fully assembled Cell Straining System (Note: Moldable Cell Chamber and Lid are missing from this photo).

Figure 2: Fully assembled Cell Straining System (Note: Moldable Cell Chamber and Lid are missing from this photo).

Figure 3: Components that make up the device's actuation system.

Figure 3: Components that make up the device's actuation system.

Figure 4: Fully assembled Arduino circuit board, utilized to program the Actuator's movement.

Figure 4: Fully assembled Arduino circuit board, utilized to program the Actuator's movement.