P18453: Centrifugal Compressor: Design and Commissioning
/public/

Detailed Design

Table of Contents

Team Vision for Detailed Design Phase

Prototyping, Engineering Analysis, Simulation

Range of Data on Compressor Map Analyzed

Range of Data on Compressor Map Analyzed

Matlab Script Used for Analysis

Matlab Script Used for Analysis

Link to the live document here

Data Obtained from Simulations over Compressor Map Range

Data Obtained from Simulations over Compressor Map Range

Plot of Power & Torque vs. Pressure Ratio over Simulated Compressor Range

Plot of Power & Torque vs. Pressure Ratio over Simulated Compressor Range

Purpose

Define instructions that will enable fabrication of the elements required to build and operate the entire system.

Instructions

  1. Instructions and EXAMPLE must be deleted before the Detailed Design Review AND Identify an owner for this document.
  2. This document will be inspected at all project reviews until the system is assembled and debugged.
  3. Define all geometries of interfaced subsystems
  4. Define detailed fabrication instructions for all unique parts.
  5. Call out all purchased parts
  6. Develop a software design that reflects operating flow charts and timing diagrams
  7. Adhere to all required design standards.
  8. Considering the purpose, the team should anticipate potential failure modes associated with construction and use of this document.

Input and Source

  1. Selected Concepts
  2. Feasibility Models
  3. System design and interface definitions

Output and Destination

  1. Complete hierarchy of design files from system level down to components
  2. Parts list
  3. Software design that specifies coding requirements
  4. Test plans, including expected performance vs. requirement and any applicable test standards (e.g., ASTM). The RIT library maintains an infoguide with links to standards databases, many of which provide industry-standard test procedures for a variety of components and systems.-->
Axle Step-Down Adaptor

Axle Step-Down Adaptor

Proposed Housing Idea

Proposed Housing Idea

Proposed Housing Idea

Proposed Housing Idea

Bill of Material (BOM)

Updated Bill of Materials

Updated Bill of Materials

Link to the live document here

Design and Flowcharts

2D system Layout

2D system Layout

2D system Layout

2D system Layout

Link to the live document here

Risk Assessment

Top 5 Risks

Top 5 Risks

Plans for next phase

MSDII First Three Week Plan

MSDII First Three Week Plan

MSDII First Three Week Gantt Chart

MSDII First Three Week Gantt Chart

Link to the live document here

Home | Planning & Execution | Imagine RIT

Problem Definition | Systems Design | Preliminary Detailed Design | Detailed Design

Build & Test Prep | Subsystem Build & Test | Integrated System Build & Test | Customer Handoff & Final Project Documentation