Table of Contents
|
Team Vision for Subsystem Level Build & Test Phase
Plans:- Completely finish purchasing
- Build both the diverter mold and toilet molds
- Begin vacuum forming of diverter
- Start concrete pouring
Completed:
- Purchasing
- Diverter mold
Subsystem Builds
For this phase our team was successful with creating the mold used for our toilet diverter as seen below.The mold was created by breaking up our design created on Fusion by dividing up the mold into individual parts.
Those parts were then used to create parts that were 3D printed on numerous printers individually.
Once all the diverted parts were created the pieces were joined together resulting in our final 3D printed mold.
Test Results Summary
Testing will commence in the following phase. Testing plans that will be conducted can be found here test plan summary.
Risk and Problem Tracking
Below are our current risk.As our project progressed with encountered various potential problems that could effect out project. Here you can find our updated problem tracker
Functional Demo Materials
Include links to:- Pre-read
- Presentation and/or handouts
- Notes from review
- Action Items
Plans for next phase
Individual Plans
Home | Planning & Execution | Imagine RIT
Problem Definition | Systems Design | Preliminary Detailed Design | Detailed Design
Build & Test Prep | Subsystem Build & Test | Integrated System Build & Test | Customer Handoff & Final Project Documentation