P20510: Eastman Museum Digitization Improvement
/public/

Build & Test Prep

Table of Contents

Team Vision for Build & Test Prep Phase

Phase Summary

Our team planned to begin building the rotating table top, and attaching our motor to it to verify that it would work as desired. We also planned on finishing the CAD models for both the table and the mechanical arm, and creating an assembly of these subsystems to see how they would work best.

The team was given feedback that caused us to reevaluate key areas of our construction that we hadn't fully considered. Mainly how we would couple the motor to rotating table and whether or not our bearing would be able to handle any unplanned for force on it. These caused us to put a shaft couple that will attach our motor and our table top so that it won't put any unnecessary force on the motor.

Test Plan Summary

A link to our test plan can be found in this requirements and test plan.

Test Plans

Click on the image for a higher-quality view.

S1

S1

S2

S2

S3

S3

S4

S4

S5

S5

S6

S6

S7

S7

S8

S8

S9

S9

S11

S11

Risk and Problem Tracking

A link to our risk management can be found here.

Our newly added risks are highlighted below. Click on the image for a higher-quality view.

Risks

Risks

Design Review Materials

Include links to:

Plans for next phase

This is our schedule for the upcoming Subsystem Build & Test phase.

Subsystem Build & Test

Subsystem Build & Test

A link to our individual plans for the next phase can be found here.


Home | Planning & Execution | Imagine RIT

Problem Definition | Systems Design | Preliminary Detailed Design | Detailed Design

Build & Test Prep | Subsystem Build & Test | Integrated System Build & Test | Customer Handoff & Final Project Documentation